Manually place the Tay plate on the carrier, press the start switch, the carrier will move to the spraying work area, the spraying work area is completed, and the carrier will exit the feeding area (if there is a flip function, the carrier will flip to the origin) , at this time, the hot air knife is turned on, and the carrier is moved from the feeding area to the working area and then returned to the feeding area.
- Enclosed spray space to reduce contamination.
- A wide range of applications, such as AR, AG, Hard Coating can be uniformly coated.
- The two-fluid nozzle with low flow and low atomizing pressure is easy to operate.
- 1. After one-time spraying, one-time baking is enough.
- 2. The equipment can be customized.
- 3. With AG Spray Coater dedicated spray valve and flow control system.
- 4. The largest product can be 2500*1500mm.
- 5. Provide complete equipment expertise and process solutions.
- 6. Provide equipment design changes according to different potion characteristics.
- 1. The glass has no flash point and no bright spot after spraying.
- 2. The hardness effect is the best in the industry, and the RA value is the lowest in the industry.
- 3. The yield rate measured by the industry can reach more than 90%.
- 4. Potion supplier certified and designated as recommended spray equipment.
- 5. It has successively obtained customer certification for mass production introduction.
Mobile phone/tablet/laptop/LCD/vehicle panel, building wall glass, whiteboard glass, explosion-proof glass, etc.